• Two (2) 24VDC individually controlled lock outputs rated @ 16 amp for 300ms. • One (1) 12VDC filtered regulated auxiliary output rated @ 1 amp continuous supply current.(Not affected by FACP trigger) • One (1) 24VDC filtered regulated auxiliary output rated @ 1 amp continuous supply current.(Not affected by FACP trigger) • Two (2) delayed follower form “C” relay outputs rated @ 1 amp/28VDC. Delay time is selectable .5 seconds or 1 second. Energized duration is 1 second. • Two (2) follower form “C” relay outputs rated @ 1 amp/28VDC. Relays energize while input is closed. • Input 115VAC 50/60Hz, 1.9 amp. • Two (2) N/O Trigger Inputs. • Built-in charger for sealed lead acid or gel type batteries. • Automatic switch over to stand-by battery when AC fails. • Maximum charge current .3 amp. • Green LED indicates input 115VAC present. • Green LED indicates panic device status (short, open or triggered). • Red LED indicates when FACP disconnect is triggered. • Fire Alarm Disconnect: - Normally Closed FACP trigger input. - Programmable Fire Alarm Disconnect options: a) Removes power to outputs and disables delayed follower relays. b) Connects power to lock outputs and enables delayed follower relays. • LK1 and LK2 adjust the panic device release time for the lock outputs from 300ms to 30 sec. • Lifetime Warranty.